Water-based white primer for porous surfaces of plaster and wood. Good penetration, adhesion and sealing properties of the surfaces, avoiding rechupados of the finishes. It is easy to apply and sanding. Due to its watery nature, it has a low odor.
White water penetrating sealer S50 Titan Pro
55,30€VAT included
Water-based white primer for porous surfaces of plaster and wood. Good penetration, adhesion and sealing properties of the surfaces, avoiding rechupados of the finishes. It is easy to apply and sanding. Due to its watery nature, it has a low odor.
You might also like
Related Products ( 10 other products in the same category )
Description
Water-based white primer for porous surfaces of plaster and wood. Good penetration, adhesion and sealing properties of the surfaces, avoiding rechupados of the finishes. It is easy to apply and sanding. Due to its watery nature, it has a low odor.
Technical data
- Nature: urethane alkyd
- Color (UNE EN ISO 11664-4): White
- Density (UNE EN ISO 2811-1): 1.35 - 1.39 Kg / l
- Performance (UNE 48282): 8 - 10 m2 / l
- Drying at 23ºC 60% RH (UNE 48301): 2 - 3 hours
- Repainted at 23ºC 60% RH (UNE 48283): 6 hours
- Application Methods: Brush, roller and gun
- Utensils Cleaning: Water
- Application Conditions, HR 80% + 10 ºC - + 30 ºC. Do not apply with rain forecast in the next hours
- Dyeing: TITAN Universal Tint or Professional Water Tint
- Solid Volume (UNE EN ISO 3233-3): 40.5 - 41.5%
- VOC (UNE EN ISO 11890-2) 2004/42 / IIA (g) (50/30) Max. VOC 29g / l
* Variations of temperature, humidity, thickness, dyeing or type of support, etc., can cause changes in drying, performance or other properties.
How to use
GENERAL RECOMMENDATIONS:
Stir well in the container. Clean the surface to be painted, eliminating dust or paints with poor adhesion.
SURFACES NOT PREPARED:
Wood: sanding the wood in the direction of the grain, limpiar thoroughly, remove resins or secretions of resins and kill alive songs. For wood outside it is recommended to treat the wood with Titanxyl Ultra Total Protection. For woods with resin / tannin oozes, it is recommended to apply one or two coats (depending on wood) of Multipurpose Water Preparation 06P that acts as a barrier to the exudations of the wood, then prime with 1 coat (indoors or 2 coats) (outdoors) of S50 Water Sealer and finish with 1 or 2 coats of enamel, according to specifications.
Cast:Once sanded and clean, apply S50 Sealer directly to the water. If the finish has to be colored, you can dye the TITAN Universal Tinting Sealer, which, in most cases, requires only one layer of final product.
On dead plaster (powdery):apply before the S50 Water Sealer, a layer of S30 Siloxane Fixative Primer p>
MAINTENANCE OF ALREADY PAINTED SURFACES IN BAD CONDITION:
Remove completely and proceed as on unprepared surfaces.
21721
0 Items
Data sheet
- Kind of product:
- Primer
- Theoretical yield per hand (m2 / L):
- 8
- Number of recommended hands:
- two
- Dry to Touch at 23ºC and 60% RH
- 2-3 hours
- Time for repainting at 23ºC and 60% RH
- 6 a.m.
- Diluent / Cleaning:
- Water
- Number of Components
- 1 component
- Type Application:
- By brush, roller or gun
- Place of application
- Interior and Exterior
- Paint Wood
- Directly
- Paint Pladur
- Directly
- Paint Plaster or Putty
- Directly
- Paint Already Painted Surfaces
- A smooth sanding and painting directly
- Danger for transport:
- Innocuous, without restrictions
Specific References
- ean13
- 8414800410037
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form