Acrylic Paint Super Washable P75 Matt White Titan Pro

Description

Matte acrylic paint with Extreme Clean technology for interiors. Thanks to its composition, it repels almost all types of domestic stains and offers great resistance to rubbing and scratching.

Technical data

• Styrene Acrylic Nature
• Matte finish
• Color (UNE EN ISO 11664-4) White
• Density (UNE EN ISO 2811-1) 1.43 - 1.47 kg / l
• Yield 10 - 12 m² / l (40 - 80 µ dry)
• Drying at 23ºC 60% RH (UNE 48301) 40 - 60 minutes
• Repainted at 23ºC 60% RH (UNE 48283) from 8 hours
• Application Methods Brush, roller and airless
• Viscosity (UNE 48076) 115 -125 KU
• Diluent Water
• Recommended thickness (UNE EN ISO 2808) 140 µ dry in two layers
• Application Conditions, RH <80% +10 ºC - +30 ºC
• TITAN Universal Tint Dyeing or TITANCOLOR System
• Solid Volume (UNE EN ISO 3233-3) 45 - 47%
• VOC (UNE EN ISO 11890-2) 2.004 / 42IIA (i) (140/140)
• Max. VOC <40 g / l

* Variations in temperature, humidity, thickness, dyeing or depending on the type of support, etc., may cause changes in drying, performance or other properties.

Characteristics

• Great covering power, performance and whiteness.
• With anti-mold preservative.
• Certified high washability (Class I).
• Flawless matte finish.
• It does not drip or splash.
• It admits revisions and touch-ups.
• Low odor
• Easy to applyaction.

Good resistance to burnishing. Due to its composition, it repels almost all types of stains (*), preventing their penetration, so that its cleaning is achieved with the simple action of a cloth moistened with water. (*) stains tested: tomato, ketchup, mustard, soy sauce, fruit juices, soft drinks, hand cream, waxes, oil, wine, coffee, shoe print, clay, povidone, aqueous ink.

Certifications

Determination of contrast ratio (Covering Power) UNE-EN-ISO 6504-3: Class 2. 10 m² / l (98% Covering Power) Resistance to wet rubbing UNE EN ISO 11998: Class 1 of washability Reaction to Fire UNE EN 13501- 1: B-s1, d0 / on substrate A2-s1, d0 Resistance against fungi UNE EN 15457: Growth 0 VOC emission ISO 16000-6: A +

How to use

GENERAL RECOMMENDATIONS:

Stir well in the container by hand or with a low speed mixer. Surfaces to be painted must be clean, dry and consistent. The applied film reaches its maximum performance of hardness and ease of cleaning after 3 weeks. To obtain better and more homogeneous finishes, the use of microfiber rollers is recommended. A good diagnosis and preparation of the support are essential to obtain the best results.

UNPREPARED SURFACES:

On surfaces in good condition: apply a first coat diluted with 5% water, applying a second undiluted. On surfaces in poor condition: healAr all affected areas, removing all material that is not well adhered and consistent, cleaning all dirt and dust that it may have. To consolidate substrate and homogenize porosity or on tempera, glue, lime paints or on surfaces where they have been removed, it is advisable to apply a first coat of S10 All Acrylic Fixed Primer 100% or S50 Water Sealer, according to the indications of their respective Technical Sheets.

MAINTENANCE OF ALREADY PAINTED SURFACES IN GOOD CONDITION

Apply the paint directly after washing or brushing, diluting the first coat with 5% water, then applying the second coat undiluted.

MAINTENANCE OF ALREADY PAINTED SURFACES IN BAD CONDITION

Completely remove old paints and proceed as on unprepared surfaces