Two-component primer. High adhesion, water resistance and protective effect. Adequate basis for products TITAN Yate.
Fields of application
Two-component primer for use on submerged surfaces in marine environments, especially iron, aluminum, stainless steel, etc., as well as wood and polyester.
- Color: Cream
- Finish: Semi-gloss
- Performance: 8-10 m2 / l (30-40 μ dry)
- Drying at 23 ° C 60% RH 2.5 - 3 days
- Repainting 60% RH at 23 ° C: 24 hours
- Mixing ratio: Base: 4 Hardener: 1
- Pot Life at 23 ° C: 6 - 8 hours
- Tools: brush, roller or spray
- Thinner: Epoxy Thinner
- Cleaning of tools: Thinner Epoxy
How to use
General recommendations:Remove the container well. The I learnedrficies painted must be clean, dry and degreased.
-Polyester:degrease thoroughly with Thinner TITAN Yacht and sand lightly before applying a coat of primer Epoxy Corrosion TITAN Yate.
-Hull metal (submerged): deoxidation and apply one coat of primer Epoxy Corrosion TITAN Yate. After 24 hours, apply 3-4 coats of Primer Epoxy Thick TITAN M150 Yate (450μ).
-Superstructure:deoxidation and apply 2 -. 4 layers of primer Epoxy Corrosion at intervals of 24 hours
-Wood:apply 2 coats of primer Epoxy Corrosion TITAN Yate diluting the 1st layer with 20% Thinner TITAN Yate.
Maintenance painted surfaces in good condition:Rinse with fresh water jet and apply directly.
Maintenance painted surfaces in poor condition:I completely eliminate Plus with TITAN Paint Stripper, followed by a wash with fresh water andproceed as unprepared surface.