Titan M150 Osmosis Epoxy Primer
Two component epoxy primer specially formulated for preventive treatment of osmosis. High antioxidant primer layer thickness on iron and aluminum. Especially for submerged surfaces.
You might also like
Related Products ( 4 other products in the same category )
Description
Two component epoxy primer specially formulated for preventive treatment of osmosis. High antioxidant primer layer thickness on iron and aluminum. Especially for submerged surfaces.
Fields of application
Or submerged surfaces in marine environments that require a high layer thickness, previously primed with epoxy primer Antioxidant TITAN Yate.
Technical characteristics
- Gray
- Finish: Semi-gloss
- Yield: 5-7 m2 / l (120-160 μ) per coat
- Drying at 23 ° C 60% RH: 8 hours
- Repainting 60% RH at 23 ° C: 20 - 24 hours
- Mixing ratio: Base: 4 Hardener: 1
- Pot Life at 23 ° C: 8 hours
- Thickness Recommended: Immersion service: 450 μ
- Tools: brush, roller or spray
- Thinner: Epoxy Thinner
- Cleaning of tools: Thinner Epoxy
How to use
General recommendations:Remove the container well. The surfaces must be clean, dry and degreased.
Unprepared surfaces Span>
-Polyester: Em>Osmosis treatment must eliminate the gel-coat, providing roughness to the surface, rinse with fresh water and let dry thoroughly. Apply 1 coat of epoxy primer yacht TITAN M150 Thick diluted with 15% Thinner TITAN Yate. Let dry for 24 hours, putty if necessary with Epoxy Putty TITAN yacht, and finish 3-4 layers of epoxy primer TITAN M150 Thick Yate.
-Iron and aluminum:deoxidation and apply 1 coat of epoxy primer TITAN yacht after 24 hours, apply 3 coats of epoxy primer TITAN M150 Thick Yate.
In all cases after more than 3 days sanding is required.
Maintenance painted surfaces in poor condition:Remove completely with Paint Stripper, followed by washing with fresh water and proceed as in unpainted surface. In-polyester surfacesPaint Stripper r not apply and remove paint using a mechanical process.
Data sheet
- Kind of product:
- Primer
- Theoretical yield per hand (m2 / L):
- 5
- Number of recommended hands:
- 3
- Sanding between layers
- It is not necessary
- Dry to Touch at 23ºC and 60% RH
- 8 a.m.
- Time for repainting at 23ºC and 60% RH
- 20-24 hours
- Diluent / Cleaning:
- Epoxy solvent
- Number of Components
- 2 components
- Mix ratio
- 4 parts of paint per 1 of catalyst
- Life of the mixture at 23ºC and 60% RH
- 8 a.m.
- Type Application:
- By brush, roller or gun
- Paint Iron or Steel
- Epoxy primer
- Paint Aluminum, Brass or Copper
- Epoxy primer
- Danger for transport:
- Prohibited Air Transportation
Specific References
- ean13
- 8414800054842
No customer questions for the moment.