Morale ceramic oil Rustic Shine

Description h3>

Protects stains, enhances, decorates and hidrofuga. It is special for terracotta floors and baro floors, aged marble, travertine, slate, stone, hydraulic mosaic and exposed brick. Easy to apply and without background and finishing complications.

Properties

Once applied it gives a shade of its raw color of natural origin (wet effect) that always lasts, it is not stained with spills of food, oils, drinks, mud, fats and other garbage. It hydrofes the surface repelling the water. It is resistant to footsteps, rubbing, washing and all kinds of uses, it does not scale and in the flooring it does not need any subsequent maintenance when the waxes are incorporated.

BRILLO-RUSTICO:In case of laying with mortar, before applying let the work dry 30 days in summer and 60 in winter minimum. In case of cement-glue, 4 or 5 days will suffice. Clean with our MORAFOND CLEANING. After cleaning with the MORAFOND CLEANING or removing cement and rinsing with water, let dry 15 days in summer and 30 in winter before application.

Very absorbent pavements: strong>(Manuals) apply the 1st layer ABUNDANT with a brush and well distributed and let it dry 24 hours, apply one layer every 24 hours until it is well covered (approx 3 - 4 layers, depending on the floor) total yield approx. 1 liter for 3 M2.

PavimeLow absorption (smooth), aged marble, stone, slate: apply a layer with a brush and well distributed every 24 hours (depending on absorption) until well covered, once covered, do not apply more layers

Hydraulic mosaic: strong>Apply the layers very extended and especially the last one of finishing to wrist or sponge very extended. Total yield approx. 1 liter for 7-10 M2.

In floorings without Gres type absorption, rasilla, etc .: WE DO NOT RECOMMEND. p>

Important: before applying avoid soil and dirt, after 2 days you can tread very carefully after 6 days normal and 20 days all use. Allow to dry with good ventilation.

No need for maintenance products, after the years and find deterioration you can apply another layer without need to stripping p>

Where other unknown products were applied, open that stripping. Maximum resistance to the interior, for greater resistance to the exterior use MORAKRON INTEMPERIE p>

Restoration and maintenance h3>

After the years if there has been deterioration or wear due to a lot of use, it will not be necessary to pickle, only clean with water and detergent to remove fats or dirt. To the outside clean with metallic brushes or steel esparto lightly and sweep. A 1st layer will be applied and a second layer 24 hours later until it is well covered. On surfaces that were applied other products will have to be stripped.

In case of a bad application for not attending our forms of applicationWe avoid any kind of guarantee.

Total PERFORMANCE:1 liter for 3 m2. in manual mud pavements, 5 m2 in mechanical mud pavements, 7-10 m2 aged marble slate etc ... Useful cleaning: strong>White spirit or white spirit

RULES:UNE 23727-90 Reaction to fire M-1 on support M-0 (non-flammable) The information provided in this data sheet is the result of our laboratory research and actual application experiences. However, given that frequently the products are used in conditions beyond our control, we can not guarantee more than the good result of the product as long as its application and use are correct.