Mulberry ceramic oil Matte Leather

Description h3>

Protects stains, enhances, decorates and hidrofuga. It is special for terracotta floors and baro floors, aged marble, travertine, slate, stone, hydraulic mosaic and exposed brick. Easy to apply and without background and finishing complications.

Properties

Once applied it gives a tint of its raw color of natural origin (wet effect) that always lasts, it is not stained with spills of food, oils, drinks, mud, fats and other garbage. It hydrofes the surface repelling the water. It is resistant to footsteps, rubbing, washing and all kinds of uses, it does not scale and in the flooring it does not need any subsequent maintenance when the waxes are incorporated.

Maximum resistance to the interior, for greater resistance to the exterior use MORAKRON INTEMPERIE p>

Exclusive formulation of blackberry varnishes with waxes incorporated in the same oil at high temperature so it is not necessary to wax, by itself it is covered, waxed, with a soft touch and a wonderful satin finish, and an excellent hardness to the footsteps, without mark tracks and without subsequent maintenance. p>

Ways of use

Before applying let the work dry 30 days in summer and 60 in minimum winter. In case of cement-glue, 4 or 5 days will suffice. Clean with our MORAFOND CLEANING.

After cleaning with the Morafond or remover-cementand rinse with water, let dry 15 days in summer and 30 in winter before application.

Shake the container and apply only the 1st coat of gloss-rustic and finish with matte (3 - 4 layers approx.) In case you want to leave a perfect waxed satin finish, after 3-4 days of rubbing with a rough cloth, sack cloth, similar or polishing machine (IN DRY).

It is applied with a brush or roller with fine foam. Dry to touch for 2 to 4 hours (depending on room temperature). p>

Once treated the pavement with our products do not need maintenance of subsequent waxing and the like since they are incorporated in the same products and the way of cleaning is like any stoneware with water and detergent p>

Remember to be careful with the "homemade formulas" because they can cause very serious problems in the mud pavement and difficult to solve.

Very absorbent pavements: strong>(Manuals) apply the 1st layer ABUNDANT with a brush and well distributed and let it dry 24 hours, apply one layer every 24 hours until it is well covered (approx 3 - 4 layers, depending on the floor) total yield approx. 1 liter for 3 M2.

Low absorption pavements (smooth), aged marble, stone, slate: apply a layer with a brush and well distributed every 24 hours (depending on absorption) until well covered, once covered, do not apply more layers

Hydraulic mosaic: strong>Apply the very extended layers and on todo the last of finishing to wrist or sponge very extended. Total yield approx. 1 liter for 7-10 M2.

In floorings without Gres type absorption, rasilla, etc .: WE DO NOT RECOMMEND. p>

Important: before applying avoid soil and dirt, after 2 days you can tread very carefully after 6 days normal and 20 days all use. Allow to dry with good ventilation.

No need for maintenance products, after the years and find deterioration you can apply another layer without need to stripping p>

Where other unknown products were applied, open that stripping. Maximum resistance to the interior, for greater resistance to the exterior use MORAKRON INTEMPERIE p>

Restoration and maintenance h3>

After the years if there has been deterioration or wear due to a lot of use, it will not be necessary to pickle, only clean with water and detergent to remove fats or dirt. To the outside clean with metallic brushes or steel esparto lightly and sweep. A 1st layer will be applied and a second layer 24 hours later until it is well covered. On surfaces that were applied other products will have to be stripped.

In case of a bad application for not attending our forms of application, we avoid any type of guarantee.

Total PERFORMANCE:1 liter for 3 m2. in manual mud pavements, 5 m2 in mechanical mud pavements, 7-10 m2 aged marble slate etc ... Useful cleaning: strong>White spirit or white spirit

RULES:UNE 23727-90 Reaction to fire M-1 on support M-0 (non-flammable) The information provided in this data sheet is the result of our laboratory research and actual application experiences. However, given that frequently the products are used in conditions beyond our control, we can not guarantee more than the good result of the product as long as its application and use are correct.