Elastic anti-cracking coating White matt 15L R50 Titan Pro

Description

Photo-reticulable coating for the protection of facades, concrete structures, repair of single-layer mortar, etc., that have cracks or can be produced with the passage of time. Raincoat. Anticarbonatation. Great resistance to destructive atmospheric elements. Good resistance to fouling. With anti-mold preservative and antiverdin. Protection extreme climates. Guarantee 12 years upon request and prescription

Technical data

• Nature: Stretched Acrylic
• Matte finish
• Color (UNE EN ISO 11664-4): White and color range + TITANCOLOR Bases: Intermediate and Neutral
• Density (UNE EN ISO 2811-1): White: 1.34 - 1.38 kg / l / Colors: 1.30 - 1.40 kg / l
• Performance (UNE 48282): 4 - 6 m2 / l (125μ dry)
• Drying at 23ºC 60% RH (UNE 48301): 30 - 60 minutes
• Repainted at 23ºC 60% RH (UNE 48283): 6 - 8 h
• Application Methods: Brush, roller or gun
• Thinner: Water
• Recommended thickness (UNE EN ISO 2808): 250μ dry (2 layers), for fissures 2mm minimum 400μ (3 layers)
• Application Conditions, HR 80% +10 ºC - +30 ºC
• Solid Volume (UNE EN ISO 3233-3): 49 - 51%
• VOC (UNE EN ISO 11890-2) 2004/42 / IIA (c) (75/40) Max. VOC 5 g / l.

* Variations of temperature, humidity, thickness, dyeing or type of support, etc., can cause changes in drying, performance or other properties.

Fields of application

For jobsif the CE Marking is required according to the UNE EN 1504-2 standard, for the following uses: p>

• Protection against penetration 1.3 (C)
• Humidity control 2.2 (C)
• Increase in resistivity 8.2 (C) li>

How to use

GENERAL RECOMMENDATIONS:

Stir well in the container. The surfaces to be painted must be clean, dry and consistent.

VERY IMPORTANT ATTENTION. DO NOT APPLY: p>

At temperatures below 7º C. With relative humidity greater than or equal to 80%. With forecast of rain in the next hours. If these instructions are not respected, the result of the application may not be satisfactory, stains of different colors may appear, tearing (snail slime, etc.). Industrias TITAN, SAU will not accept any claim that has not taken into account these instructions. Pay special attention to those dark colors, because some of them are more susceptible to the occurrence of the above-mentioned phenomena, reason for more to observe the indicated indications and precautions.

SUPERPREPARATIONS NOT PREPARED:

On surfaces in good condition: apply a first coat diluted with 10 - 15% of water, applying a second layer undiluted. On surfaces in poor condition: clean all affected areas, removing all material that is not well adhered and consistent, cleaning all dirt and dust that may have. To consolidate substrate and homogenize porosity or on tempera paints, to the cabbagea, to the lime or on surfaces where they have been removed: apply a first layer of S20 Primer Superfixing Acrylic Primer or S30 Siloxane Fixative Primer according to the indications of their respective technical specifications.

MAINTENANCE OF PAINTED SURFACES IN GOOD CONDITION:

Directly apply the previously washed or brushed paint, diluting the first layer with 10 - 15% water, then apply the second layer as is p>

MAINTENANCE OF ALREADY PAINTED SURFACES IN BAD CONDITION:

Completely remove the old paints and proceed as on unprepared surfaces. p>