Extra Varnish Shiny floors Xylazel

Description

Brilliant one-component polyurethane varnish, hardened by moisture from the air, highly resistant to abrasion and chemicals.

Features

• High brightness and great transparency.
• High hardness, resistance to abrasion and impacts.
• Rapid drying (1 hour).
• Resistant to alcohol, detergents, oils and harsh chemicals.
• Easy application with brush, brush, roller and gun.
• It can be applied on concrete and porous mineral surfaces.

Fields of application

For all types of woods in interior, especially parquet floors, where the requirements of resistance to abrasion and impact are very high (sports tracks, bowling, skating rinks, schools, etc.). It is ideal for varnishing wooden objects where high resistance to abrasion and impact is required, such as sporting goods, doors of great use, etc.

Technical data

• Density at 20º C: 0.92-1,000 g / mL
• Brookfield viscosity. 2.5 dPas
• Solids content: 50%
• Drying:It depends on the atmospheric conditions, since it reacts with the humidity. It can be applied with a high degree of ambient humidity. It does not bleach, it does not candle. Touch: 1 hour approx. Repainting: between 3 and 12 hours approx. Heco to step on: about 24 to 48 hours

How to use

Preparation

The surfaces to be varnished must be dry and clean.

New wood

Apply in thin layers. The number of hands depends on the finish you want to achieve. It is advisable to sand lightly between layers to eliminate possible surface imperfections and improve adhesion. The varnish is dry to be sanded after a time of 3 to 12 hours, depending on the environmental humidity. When between layers the waiting period is long, it is advisable to sand vigorously.

Already varnished woods

On old varnish, the surface should be sanded more strongly before applying XYLAZEL EXTRA VARNISH SOILS, to favor a good grip. With unknown old varnishes it is advisable to apply a small compatibility test before applying. Sometimes, during the drying of the varnishes a "pitting" is formed, as small bubbles of air remain inside the film. We must ensure that the wood is dry when varnishing and apply the varnish in thin layers (50 microns dry or less), avoiding a consumption greater than 120 g / m2 (8 m2 / L). In floors that have been waxed or cleaned with polish, remove the rests with solvent before applying XYLAZEL VARNISH EXTRA SOILS.

performance

8 - 15 m2 / L and per hand depending on the layer thickness you want to give.

How to use

The product can be applied by brush, brush and roller. If the edge of the container has been stained, clean it well before closing it

Tool cleaning

Use Xylazel Diluent for Polyurethanes