Water-based varnish of unalterable shine and quick drying. Resistant to household chemicals. Excellent blocking. Does not yellow. With anti-mold preservative. Great hardness, resistance and elasticity.
Fields of application
For the protection and decoration of all kinds of wooden surfaces.
- Nature: Acrylic - Polyurethane
- Color: Colorless and color gamut
- Yield: 10-16 m2 / L
- Application tools: Brush and Roller
- Dilution: 5% 1st layer for unvarnished wood
- Cleaning of utensils and dilution: Water
Reaction to Fire UNE EN 13501-1: B-s2, d0 / On MDF substrate B-s1, d0
VOC ISO 16000-6 emission: A +
Toy safety. Migration of certain elements UNE-EN 71-3
Community Ecolabel for interior and exterior paints and varnishes (Ecolabel)
How to use
Stir well in the container. Surfaces must be smooth (sanded), degreased, clean and dry. Apply in thin coats and sand lightly between coats. The moisture content of the wood should not exceed 12% in hard wood and 15% in softwood. 2 Do not varnish in full sun or with dew.
Sand the wood in the grain direction, thoroughly clean, remove resins or resin secretions and kill sharp edges. Old unvarnished wood: it is essential to completely remove the dry and gray surface by sanding or brushing thoroughly until the wood in good condition is exposed.
Indoors: apply 2 or 3 coats.
Outdoors: For a better protection of the wood outdoors, apply Titanxyl Total Protection Ultra or Titanxyl Lasur Bottom Ultra, finishing with 2 or 3 layers of Ecological Water Varnish.
For restoration of interior wood with woodworm problems, apply a layer of Titanxyl Water-repellent, with mold problems, apply a layer of Titanxyl Total Protection Ultra or Titanxyl Lasur Ultra Fund.
Resinous and tropical woods: can prevent drying. Thoroughly degrease with TITAN Yate Thinner to remove resin. Apply a first coat on a reduced surface and observe. If the resin exudation persists, consult the Technical Service, but finish with 2 - 3 layers of Ecological Water Varnish.
The tonality, intensity of the final color depend on the type, color and thickness of the wood as well as the number of layers. If the desired color has been achieved with the 1st coat, finish with colorless.
Maintenance of already painted surfaces in good condition
Lightly sand, remove the generated dust and apply 1 or 2 coats depending on the state of the surface. When old varnishes are catalyzed or polyurethane, it is essential to sand the entire surface thoroughly, to remove them completely.
Maintenance of already painted surfaces in poor condition
Remove completely and proceed as on unprepared surfaces.