Teak oil Iki Decor 25 L
Revitalizer for any type of wood (especially the hard of tropical origin). Support the enhancement of the natural tones of the same enhancing its natural magnificence. Colored finish with specially selected iron oxides. Its purpose is to protect and beautify all types of wood, either indoors, either in outdoor conditions.
You might also like
Related Products ( 8 other products in the same category )
Product Description
Revitalizer for any type of wood (especially the hard of tropical origin). Support the enhancement of the natural tones of the same enhancing its natural magnificence. Colored finish with specially selected iron oxides. Its purpose is to protect and beautify all types of wood, either indoors, either in outdoor conditions. Enhances the natural beauty of wood, coloring it and protecting it against graying.
Features teak oil
- Ease of brushing, rodillo short hair or airbrush projection.
- Great penetrating power.
- Warm and silky finish.
- Gives the wood a strong hydrophobic character.
- No way film
- Very easy maintenance, restores wood oils lost over time.
- Non slip
- Respect the natural look of wood
Technical Data
- Drying: 1-2 hours.
- Performance: 8-15 m2 / L (60-80 g / m2 per coat).
- Number of coats: 1 or 2, as needed.
- Cleaning: White spirit or solvent
How to use
- Support and preparation. Applicable on all types of wood. However, in outdoor applications the use of questionable durability timber will be avoided. The timber must be free of dust and dirt and free of any coating of varnish or paint, in order to facilitate good penetration and adhesion of the product on the substrate. Do not apply to wood containing more than 15% humidity.
- Application: Product to use. Homogenize before use. For ease of application and penetration of teak oil, avoid the application on wood exposed to the sun or is overheated. Apply to saturation of wood, by brush or roller uniformly. Leave for 20-30 '. Wipe off excess with a cloth. For a perfect finish once the first coat dries, sand lightly and extend a 2nd layer with a cloth.
- Maintenance:If over time with signs of degradation were observed, just lightly sand the surface in question and apply 1-2 coats of teak oil. To avoid the risk of self combustion of rags and tools used, we recommend moisten with water and remove them in a sealed plastic bag or extended leave to dry in air.
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Mate
- Theoretical yield per hand (m2 / L):
- 10
- Number of recommended hands:
- two
- Dry to Touch at 23ºC and 60% RH
- 1-2 hours
- Time for repainting at 23ºC and 60% RH
- 8 a.m.
- Diluent / Cleaning:
- Universal Solvent
- Type Application:
- By brush, roller or gun
- Place of application
- Interior and Exterior
- Paint Wood
- Directly
- Paint Already Painted Surfaces
- A smooth sanding and painting directly
- Danger for transport:
- Dangerous terrestrial / maritime, airborne
- advice
- Remove with a dry cloth the excess that does not absorb the wood
- Viscosity Ford Cup 4 (seconds)
- 12
Specific References
- ean13
- 8428092521777
No customer questions for the moment.