The DIY online store specializing in automotive paints and paints for the home
Leakproofing Oropalgum Oropal 15 L
Waterproofing to water, based on acrylic styrene emulsion. Indicated for waterproofing roofs, easy to apply, providing a continuous thick-layer coating that allows repairing areas of cracks or areas prone to their formation. It resists external aging and maintains elasticity below 0ºC. Armable with fabrics and special fibers. Non-continuous walkable or passable, with resistance to soiling. Contains preservatives that provide the paint with fungicidal and anti-mold protection.
Related Products ( 11 other products in the same category )
Description
Waterproofing to water, based on acrylic styrene emulsion. Indicated for waterproofing roofs, easy to apply, providing a continuous thick-layer coating that allows repairing areas of cracks or areas prone to their formation. It resists external aging and maintains elasticity below 0ºC. Armable with fabrics and special fibers. Non-continuous walkable or passable, with resistance to soiling. Contains preservatives that provide the paint with fungicidal and anti-mold protection.
physical parameters
- Viscosity (Brookfield sp6 10rpm) 23000 – 43000 cpoise
- Specific gravity 1.35 – 1.39 g/mL
- Solids 58 – 60%
- VOC < 30g/L
- Limit value (2010) according to directive 2004/42/CE for this product (sub. cat. A/c): 40 g/L
- Yield 1 m2/L (1400 g/m2) (per coat)
- Appearance on the container Viscous liquid
- Appearance of the dry film
- Elastic matte finish with good leveling
- Stability (without opening the container) 12 months at 10 – 25ºC
- Gloss < 5%
- Adhesion 100% (Max: GT0)
Product use
- Cement support: concrete, stone and brick
- Preparation of the support: The surface must be dry, without efflorescence, stains or cracks of more than 0.2 mm in width. Sealing advisable
- Product preparation: No paintar at less than 10ºC, nor with risk of rain, fog or frost. Before applying, homogenize the product well with a spatula
- Application system: Brush and Roller
- Dilution Up to 15% with water (the first coat).
- Application: Seal the surface with OROIMPER 106 or with a coat of OROIMPER 115 diluted 15% with water. Apply two dry coats of OROIMPER 115, 500 µm, allowing each coat to dry thoroughly.
- Drying/curing Touch dry: 4 – 12 hours (depending on humidity) The drying time is greatly influenced by the grammage, the type and condition of the support and the environmental conditions.
- Repainting 18 – 24 hours (depending on humidity)
- WATER cleaning
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Mate
- Theoretical yield per hand (m2 / L):
- 3
- Number of recommended hands:
- 3
- Dry to Touch at 23ºC and 60% RH
- 1 hour
- Time for repainting at 23ºC and 60% RH
- 2 hours
- First layer application
- Dilute between 20-25% so that it penetrates well into the support
- Diluent / Cleaning:
- Water
- Type Application:
- With brush or roller
- Place of application
- Only Exterior
- Paint Galvanized Steel
- Directly
- Paint Ceramic Surfaces
- Only if it is porous. Dilute first hand
- Danger for transport:
- Innocuous, without restrictions
No customer questions for the moment.