Bodywork Two-Coat Spray Kit All brands + Primer + Varnish
Product customisationDon't forget to save your customization to be able to add to cart
You might also like
Related Products ( 11 other products in the same category )
* The color of the filler can be white, gray or black depending on the color required by the finishing paint
Matte opaque solvent acrylic enamel, with very good coverage and easy application, can be covered with two-layer varnish. Available in all colors of all 4-wheeler commercial brands. Smooth, metallic, mica, pearl colors. Intended for car body repair. It can be dried in the oven and at room temperature.
Once the two-coat enamel has dried for 25-30 minutes, it should be covered with a two-component two-coat varnish if an optimal finish is desired or with a spray two-coat varnish.
Apply two to three medium coats needed to cover the area with a 10-15 minute wait between each coat. Once the two-coat enamel has dried for 25-30 minutes, it should be covered with a two-component two-coat varnish if an optimal finish is desired or with a spray two-coat varnish.
2k Primer Spray
High quality anticorrosive primer with ideal adhesion on new OEM panels (E-COAT). The good absorption of the spray guarantees excellent results. It is an ideal product for metallic surfaces due to its anticorrosive power. Repaintable with any 2 component product. Dries in 10 minutes.
Apply doThere is three medium coats needed to cover the area with a 10-12 minute wait between each coat. Each coat should appear even and dry. Lightly water sand before applying color coat using P800-P1000 sandpaper.
Varnish Spray 2k
High gloss clear varnish with excellent application and fast drying. Suitable for all high-quality finishes. It ensures a long-lasting shine and offers excellent resistance to extreme atmospheric conditions.
Let dry 30 minutes after applying color before applying varnish. Apply two or three wet coats with a 5-10 minute wait between coats. Each coat should be wet and shiny, but not in a dripping state. In case of light dirt or dust embedded in the clear coat, it can be lightly wet sanded using P1500 grit paper. Be careful not to apply wax for the next 30 days.
- Kind of product:
- Finishing paint or final coat
- Time for repainting at 23ºC and 60% RH
- 25 - 30 min
- Diluent / Cleaning:
- Acrylic Solvent
- Type Application: