Adhesion promoter for a wide variety of plastic parts in the automotive sector. garden furniture or other hard plastic objects. Applicable on the following types: PP, PUR, PS, PA, PP-EPDM, ABS, PVC, GRP, PC. It is suitable in the application of patches and / or small surfaces. It is very easy to apply and allows high adhesion power on the indicated substrates. The VOC content is 754 g / l (2004/42 / CE) IIB (E) (840).
Preparation of the surface h3>
Remove dirt with soap and water; Once the surface to be painted is dry, degrease with Solvent nº 94.
If the surface of the plastic is not uniform, it is recommended to heat the piece to facilitate any residue of release agent to surface and get a good cleaning of it.
If necessary, sand with 600 sandpaper and degrease to remove dust.
Application mode h3>
Shake the container for about 2-3 minutes before using Spray Adherence Promoter.
Apply in 1-2 thin hands.
After use, invert the container and clean the valve.
Painting distance: 20 - 30 cms.
Drying time:5 min
Characteristics of the dry film
Brightness 60º-60º: Mate
Repaintability: From 5-10 min.
Keep under cover in a cool and ventilated place, avoiding direct exposure to sunlight. We advise temperatures between 5 and 30 ºC. CAUTION: Under no circumstances should the containers exceed 50ºC. Duration in the package: At least 2 years from its manufacture. After this time consult with n / Dept. Technical.