2-component filler for exclusive use in industrial facilities. For wet-on-wet application. It can be used as an adhesion promoter and as a sealant for the repair of used vehicles as well as for design finishes or new vehicle wraps. Offers excellent adhesion on already hardened, solvent resistant substrates that have been cleaned but not sanded.
2K wet-on-wet primer SealerFill Primer Gray 4L
160,70€VAT included
2-component filler for exclusive use in industrial facilities. For wet-on-wet application. It can be used as an adhesion promoter and as a sealant for the repair of used vehicles as well as for design finishes or new vehicle wraps. Offers excellent adhesion on already hardened, solvent resistant substrates that have been cleaned but not sanded.
You might also like
Related Products ( 7 other products in the same category )
-50%
Description
2-component filler for exclusive use in industrial facilities. For wet-on-wet application. It can be used as an adhesion promoter and as a sealant for the repair of used vehicles as well as for design finishes or new vehicle wraps. Offers excellent adhesion on already hardened, solvent resistant substrates that have been cleaned but not sanded.
Technical characteristics
- Gray
- Dry to the touch: 30 min. at 20º C
- Thickness: 20 - 30 microns per coat
- Shine: satin
- Repainted: 20 min at 23º C
- Density: 1.25 + - 0.01
How to use
*Shake well before use.
- Surface preparation: remove any remaining grease or silicone. Gently rub only small areas one by one. When repainting older vehicles, soak an abrasive wool in D600 and clean the surface. Areas exposed to excessive stress (front hood area and door handle egg areas) should be sanded dry.
Finish
Apply the nail polish wet on wet. When the evaporation time exceeds 3 hours at 20ºC an intermediate sanding is required
LT0898
1 Item
Data sheet
- Kind of product:
- Primer
- Theoretical yield per hand (m2 / L):
- 10
- Number of recommended hands:
- two
- Sanding between layers
- Sand final coat with P400-P500
- Dry to Touch at 23ºC and 60% RH
- 2 h
- Time for repainting at 23ºC and 60% RH
- 5 min repainted on itself. 2 h for sanding and color application
- Diluent / Cleaning:
- Acrylic Solvent
- Number of Components
- 2 components
- Mix ratio
- 2 parts of paint per 1 of catalyst
- Life of the mixture at 23ºC and 60% RH
- 3 hours
- Type Application:
- By gun
- Place of application
- Interior and Exterior
- Paint Iron or Steel
- Directly
- Paint Aluminum, Brass or Copper
- Epoxy primer
- Paint Fiber Polyester
- Directly
- Paint Galvanized Steel
- Epoxy primer
- Paint Plastic
- Priming Plastics, Very thin finishing layer
- Paint Already Painted Surfaces
- Eliminate if the paint is of one component
- Danger for transport:
- Prohibited Air Transportation
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form