Plastic primer PROMOTOR 895 1L BESA
Adhesion promoter for a wide variety of plastic parts in the automotive sector. garden furniture or other hard plastic objects. Applicable on the following types: PP, PUR, PS, PA, PP-EPDM, ABS, PVC, GRP, PC It is suitable for the application of patches and / or small surfaces. It is very easy to apply and allows high adhesion power on the indicated substrates.
You might also like
Related Products ( 7 other products in the same category )
Description h3>
Adhesion promoter for a wide variety of plastic parts in the automotive sector. garden furniture or other hard plastic objects. Applicable on the following types: PP, PUR, PS, PA, PP-EPDM, ABS, PVC, GRP, PC It is suitable for the application of patches and / or small surfaces. It is very easy to apply and allows high adhesion power on the indicated substrates. "EXCLUSIVE USE IN INDUSTRIAL FACILITIES"
Technical data h3>
- Density 20ºC (g / cc): 0.87 ± 0.02
- Viscosity of supply at 20ºC: 12-14 sec. Ford No. 4
- % Non-volatile matter (weight / volume): 4% ± 1 weight / vol.
- VOC (g / l): 835 (Ready to use)
- Type of product: Modified chlorinated polyolefin
- Color: Colorless
Preparation of the surface h3>
Remove dirt with soap and water; Once the surface to be painted is dry, degrease with Solvent nº 94.
If the surface of the plastic is not uniform, it is recommended to heat the piece to facilitate any residue of release agent to surface and get a good cleaning of it.
If necessary, sand with 600 sandpaper and degrease to remove dust
Application mode h3>
Drying time: 5 min.
Features of the dry film
Theoretical yield (m² / l): 10 - 11 (3 m)
Brightness 60º-60º: Mate
Repaintability: From 5 min.
Storage
Keep under cover in a cool and ventilated place, avoiding direct exposure to sunlight. We advise temperatures between 5 and 30 ºC.
Duration in the package: At least 2 years from its manufacture. After this time consult with n / Dept. Technical.
Data sheet
- Kind of product:
- Primer
- Degree of Brightness
- Mate
- Theoretical yield per hand (m2 / L):
- 10
- Number of recommended hands:
- one
- Sanding between layers
- It is not necessary
- Dry to Touch at 23ºC and 60% RH
- 1 h for sanding
- Time for repainting at 23ºC and 60% RH
- 10 minutes
- Number of Components
- 1 component
- Type Application:
- By gun
- Paint Plastic
- Directly
- Danger for transport:
- Prohibited Air Transportation
- Viscosity Ford Cup 4 (seconds)
- 12-14 "Aerográfica
- Dilución Pistola Gravedad
- Undiluted
- Evaporation solvents
- 2 min.
No customer questions for the moment.