Menu
-
CAR PAINTINGS
-
PAINT AT HOME
- Varnishes for interior wood
- Exterior and marine varnishes for wood
- Exterior wood and deck stains and teak oils
- Enamels for Wood
- Furniture, kitchen cupboards and doors painting
- Chalk colour paint and chalk spray paint
- Anti termites treatments and woodworms protection
- Primers for Wood
- Wood putties
- Clean and Renovate Wood
- Furniture repair
-
PROFESSIONAL PAINT
-
BOAT PAINTING
-
CRAFTS
-
GARDEN
- COLD AND HEAT
-
HARDWARE
-
TOOLS
-
ELECTRICITY
-
PLUMBING AND GAS
- DECORATION
- ORDINATION
-
BATHROOM
- HOME
Search
Textured spray for bumper URKI-PLAST Black 400ML BESA
Spray paint specially formulated for the touch-up of vehicle bumpers. Presents a finish that resembles those of origin. Its use as an anchor primer for plastics with excellent adhesion is feasible. To achieve different textures, the nozzles can be exchanged, as well as to distance the paint distance more or less. The VOC content is 840 g / l (2004/42 / CE) IIB (E) (840)
You might also like
Related Products ( 12 other products in the same category )
Bumper Texture Spray 400 ml
Synthetic Restorer URKI-PT 75ML BESA
URKI-PLAST Textured Bumper Spray Kit + 895 BESA Plastic Primer
Description
Spray paint specially formulated for the touch-up of vehicle bumpers. Presents a finish that resembles those of origin. Its use as an anchor primer for plastics with excellent adhesion is feasible. To achieve different textures, the nozzles can be exchanged, as well as to distance the paint distance more or less. The VOC content is 840 g / l (2004/42 / CE) IIB (E) (840)
Surface Preparation
- Remove the surface with soap and water; once dry, degreasing with Solvent nº 94.
- For plastics that are difficult to adhere, Adhesive Adhesive Spray for Plastics can be used previously.
- Do not apply on synthetic enamels (alcide base).
Application mode
- Shake the container for about 2-3 minutes before using Spray Urki-Plast.
- Apply in 2-3 coats, according to texture, leaving 5 - 10 min. between layers.
- After use, invert the container and clean the valve.
- Painting distance: 20 - 30 cms.
- Drying time: 30 min.
Characteristics of the dry film
- Color: 9005 Black
- Brightness 60º-60º: Mate
- Repaintability: 4 h.
Storage
Keep under cover in a cool and ventilated place, avoiding direct exposure to sunlight. We advise temperatures between 5 and 30 ºC. CAUTION: Under no circumstances should the containers exceed 50ºC. Duration in the package: At least 2 years from its manufacture. After this time consult with n / Dept. Technical.
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Mate
- Number of recommended hands:
- 1
- Dry to Touch at 23ºC and 60% RH
- 30 min
- Time for repainting at 23ºC and 60% RH
- 10 minutes
- Type Application:
- Spray
- Paint Aluminum, Brass or Copper
- Directly
- Paint Already Painted Surfaces
- A smooth sanding and painting directly
- Danger for transport:
- Prohibited Air Transportation
Specific References
- ean13
- 8435099905165
Download
No customer questions for the moment.