Bio-sustainable paint bucket 4L Titanlux

Bio-sustainable paint bucket 4L Titanlux

Bio-sustainable paint bucket 4L Titanlux

€36.95VAT included
  • Selected color: White
  • Selected color: Off white
  • Selected color: White linum
  • Selected color: White stone
  • Selected color: Natural stone
  • Selected color: White sand
  • Selected color: Ice gray
  • Selected color: Quartz gray
  • Selected color: Gray stone
Selected color: White stone
Out of stock. Product available with different options

Washable water paint for interior walls and ceilings, formulated with sustainability criteria. Unchanging white, does not drip or splash. It does not contain volatile organic compounds, nor biocidal agents, so it is indicated for users who may have developed an allergic sensitivity to these compounds.

Cradle to Cradle Certified: GOLD.

Description

Washable water paint for interior walls and ceilings, formulated with sustainability criteria. Unchanging white, does not drip or splash. It does not contain volatile organic compounds, nor biocidal agents, so it is indicated for users who may have developed an allergic sensitivity to these compounds.

Cradle to Cradle Certified: GOLD.

Technical data

  • Styrene Acrylic Nature (Biomass balance)
  • Matte finish
  • Color (UNE EN ISO 11664-4) White and colors
  • Density (UNE EN ISO 2811-1) 1.40 - 1.44 Kg / l
  • Yield (UNE 48282) 8 - 10 m2 / l
  • Drying at 23oC 60% RH (UNE 48301) 30 - 60 minutes
  • Repainting at 23oC 60% RH (UNE 48283) 6 - 8 hours
  • Application Methods Brush, roller and airless
  • Thinner Water
  • Application Conditions, RH <80% +10 oC - +30 oC
  • Solid Volume (UNE EN ISO 3233-3) 37 - 38%
  • VOC (UNE EN ISO 11890-2) 2004/42 / IIA (a) (75/30) Max. VOC <1 g / l
  • Presentation 4l

Variations in temperature, humidity, thickness, tinting or depending on the type of substrate, etc., can cause changes in drying, performance or other properties.

Certifications

Wet rub resistance UNE EN ISO 11998: Class 2 washability
Cradle to Cradle Certified: GOLD (LEED Credits)
https://www.c2ccertified.org/products/scorecard/p80-titan-natural-industrias-titan-s.a.u

How to use

GENERAL RECOMMENDATIONS:

Stir well in the container. Surfaces to be painted must be clean, dry and consistent.

VERY IMPORTANT ATTENTION. DO NOT APPLY:

At temperatures below 7o C. With relative humidity greater than or equal to 80%. With rain forecast in the next hours. If these instructions are not followed, the result of the application may not be satisfactory, stains of 1 different color may appear, tears (snail slime, etc.). Industrias TITAN, S. A. U. will not accept any claim that has not taken into account these instructions. Pay special attention to those dark colors, as some of them are more susceptible to the aforementioned phenomena, which is all the more reason to observe the indicated indications and precautions.

VERY IMPORTANT ATTENTION. DO NOT APPLY:

At temperatures below 7o C. With relative humidity greater than or equal to 80%. With rain forecast in the next hours. If these instructions are not followed, the result of the application may not be satisfactory, stains of different colors, tearing (snail slime, etc.) may appear. Industrias TITAN, S. A. U. will not accept any claim that has not taken into account these instructions. This may be more pronounced in some dark colors. UN PREPARED SURFACES: On surfaces in good condition: apply a first coat diluted with 10 - 15% water, applying a second undiluted layer. On surfaces in poor condition, to consolidate substrate and homogenize porosity or on tempera, glue, lime or surfaces where they have been removed: clean up all affected areas, removing all material that is not well adhered and Consistent, cleaning all the dirt and dust that it might have and applying a first layer diluted with 5% water, applying a second undiluted layer.

MAINTENANCE OF SURFACES ALREADY PAINTED IN GOOD CONDITION:

Apply the paint directly after washing or brushing. You can dilute the first layer with 5% water, then apply the second as is.

MAINTENANCE SURFACES ALREADY PAINTED IN POOR CONDITION:

Completely remove old paints and proceed as on unprepared surfaces.

0 Items

Titan
22363
8414800424973
Data sheet
Kind of product:
Finishing paint or final coat
Degree of Brightness
Mate
Theoretical yield per hand (m2 / L):
9
Sanding between layers
It is not necessary
Dry to Touch at 23ºC and 60% RH
20-40 min
Time for repainting at 23ºC and 60% RH
6-8 h
Diluent / Cleaning:
Water
Type Application:
By brush, roller or gun
Place of application
Interior and Exterior
Paint Pladur
Primer Sealer or Fixer
Paint Plaster or Putty
Primer Sealer or Fixer
Paint Concrete or Cement
Fixing Primer
Paint Already Painted Surfaces
Directly without sanding
Danger for transport:
Innocuous, without restrictions
Your Question has been successfully sent our team. Thanks for question!
Do not leave with doubt! Its time to ask!
hide form
Captcha

You might also like